Subaru 2002 Legacy Owner's Manual page 194

B Tape travel indicators
These indicate the direction the cassette tape is moving.
" : Indicates that the top side of the cassette is being played back.
A : Indicates that the bottom side of the cassette is being played
back.
B Program button (PROG)
When the program button
travel indicators will switch and the player will begin playing back the
opposite side of the tape. The same mechanism is automatically acti-
vated when the end of the tape is reached. This allows the opposite
side of the tape to play, providing continuous playback.
B Fast-forward button (FF)
To fast-forward the tape, press the "FF" button
warding, lightly press the "
B Rewind button (REW)
To rewind the tape, press the "REW" button
lightly press the "
B Eject button (
When " " button
tape is ejected.
The ejection function is also active when the ignition switch is in the
"LOCK" position. Always make certain that you remove the cassette
tape.
B Tape program sensor button (TPS)
n Blank skip
When the "TPS" button
and the player will automatically skip any blank portion of 15 second
or more and play the next program, even if it is on the other side. To
cancel blank skip mode, press the "TPS" button again.
n Blank search
Press "TPS" button
the current selection or to skip to the beginning of the next selection.
Y
is pressed during playback, the tape
8
" button.
8
" button.
)
8
is pressed, playback stops and the cassette
Q
is pressed, the "TPS" indicator will come on
Q
during playback to return to the beginning of
Audio
E
. To stop fast-for-
R
. To stop rewinding,
– CONTINUED –
5-13