Seat Heater (If Equipped) - Subaru 2002 Legacy Owner's Manual

Seat heater (if equipped)

CAUTION
D Use of the seat heater for a long period of time while the
engine is not running can cause battery discharge.
D Do not put anything on the seat which insulates against heat,
such as a blanket, cushion, or similar items. This may cause the
seat heater to overheat.
D When cleaning the seat, do not use benzine, paint thinner, or
any similar materials.
The seat heater operates when the ignition switch is either in the "ACC"
or "ON" position.
To turn on the seat heater, push the "LO" or "HI" position on the switch,
as desired, depending on the temperature.
LO: Normal heating
HI: Rapid heating
The indicator located on the switch comes on when the seat heater is in
operation. When the vehicle's interior is warmed enough or before you
leave the vehicle, be sure to turn the switch off.
Seat, seatbelt and SRS airbags
HB1093BB
HB1073BB
– CONTINUED –
1-9