Subaru 2002 Legacy Owner's Manual page 45

Seat, seatbelt and SRS airbags
HB1029BB
The shoulder belt anchor height should be adjusted to the position
best suited for you. To lower the anchor height, push the release but-
ton and slide the anchor down. To raise the anchor height, slide the
anchor up. Pull down on the anchor to make sure that it is locked in
place.
Always adjust the anchor height so that the shoulder belt passes over
the middle of the shoulder without touching the neck.
n Unfastening the seatbelt
Push
HB0303
Push the button on the buckle.
Before closing the door, make sure that the belts are retracted prop-
erly to avoid catching the belt webbing in the door.
– CONTINUED –
1-21