Daytime Running Light System; Turn Signal Lever - Subaru 2002 Legacy Owner's Manual

To flash the headlights, pull the lever toward you and then release it.
The high beam will stay on for as long as you hold the lever. The
headlight flasher works even though the lighting switch is in the "OFF"
position.
When the headlights are on high beam, the high beam indicator light
"a" on the instrument panel also comes on.
J Daytime running light system
WARNING
The tail lights, parking lights, and side marker lights are not
turned on by the daytime running light system. The light switch
must always be turned to the "a" position when it is dark out-
side.
The low beam headlights will automatically come on at reduced bright-
ness when the engine has started, under the following conditions:
D The parking brake is fully released.
D The light switch is in the "OFF" or "p" position.

Turn signal lever

Right turn
Left turn
To activate the right turn signal, push the turn signal lever up. To activate
the left turn signal, push the turn signal lever down. When the turn is fin-
Instruments and controls
HB2015BB
– CONTINUED –
3-21