Subaru 2002 Legacy Owner's Manual page 397

4. Slowly pour the coolant and fill to the radiator filler neck and to the
reserve tank's "FULL" level mark. Do not pour the coolant too quickly,
as this may lead to insufficient air bleeding and trapped air in the sys-
tem.
Coolant capacity:
2.5 liter models
3.0 liter models
Rubber gaskets
5. Put the radiator cap back on and tighten firmly. At this time, make
sure that the rubber gasket in the radiator cap is correctly in place.
6. Start and run the engine for more than five minutes at 2,000 to
3,000 rpm.
HBB007CB
MT. 7.2 US qt (6.8 liters, 6.0 Imp qt)
AT. 7.1 US qt (6.7 liters, 5.9 Imp qt)
8.4 US qt (7.9 liters, 7.0 Imp qt)
HG0115
Maintenance and service
HBB004FB
– CONTINUED –
11-17