Wheel Covers - Subaru 2002 Legacy Owner's Manual

J Wheel covers
B Removing the wheel cover
Insert the wheel nut wrench into the notch provided, and pry the
wheel cover off.
B Installing the wheel cover
Align the valve with the valve hole in the cover, then fit the cover on
the wheel by tapping your hand evenly around the circumference of
the cover.
NOTE
When any of the wheels is removed and replaced for tire rotation or
to change a flat tire, always check the tightness of the wheel nuts af-
ter driving approximately 600 miles (1,000 km). If any nut is loose,
11-46
HB9032BA
HGA013BA