Subaru 2002 Legacy Owner's Manual page 444

Hide thumbs Also See for 2002 Legacy:

Table of Contents

n Back-up and brake/tail light bulbs

1. Unlatch the rear finisher light cover by moving the knob upward.

Open the cover up.

2. Remove the bulb socket from the rear finisher light assembly by

turning it counterclockwise.

3. Remove the bulb from the socket by pushing it and turning coun-

terclockwise. Install a new bulb in the socket.

4. Set the bulb holder into the rear finisher light assembly and turn it

clockwise until it locks.

5. Close the cover and latch the lock.

J License plate light

1. Remove the mounting screws using a phillips screwdriver.

Show Quick Links

Chapters

Table of Contents

2002 outback