Subaru 2002 Legacy Owner's Manual page 213

NOTE
D If a disc is in the player, the "CD" button is used to change
from CD player operation to CD changer operation. Each time the
"CD" button is pressed, the operating mode will change alter-
nately.
D At the end of the disc, the player automatically continues with
the next disc.
D After playback on the last disc finishes, playback will automat-
ically return to the first disc.
D If you have loaded fewer than 6 discs, any missing disc is
automatically skipped.
B Selection of a desired disc
D
Briefly press the "Y" button to skip to the next disc and briefly
press the "B" button to skip to the previous disc.
n Operation with the in-dash CD changer unit
Press the desired "Disc select" button (numbered from 1 to 6) and the
disc will begin to play.
B To select the desired disc
J
Press either the disc up button "DISC Y"
or disc down button
J
"DISC B" to select the desired disc. Each time the "DISC Y"
but-
ton is pressed, the indicated disc number will increase. Each time the
"DISC B" button is pressed, the indicated disc number will decrease.
Constant pressure on these buttons causes a continuous change in
the disc number.
B To select a song from its beginning
n Forward direction
Z
Briefly press the """ " button to skip to the beginning of the next
track. Each time the button is pressed, the indicated track number will
increase.
n Backward direction
Z
Briefly press the " AA" button
to skip to the beginning of the cur-
rent track. Each time the button is pressed, the indicated track num-
ber will decrease.
5-32