Subaru 2002 Legacy Owner's Manual page 230

B Program switching buttons
When the program switching buttons "
pressed at the same time during playback, the tape travel indicators
will switch and the player will begin playing back the opposite side of
the tape. The same mechanism is automatically activated when the
end of the tape is reached. This allows the opposite side of the tape
to play, providing continuous playback.
B Fast-forward button
To fast-forward the tape, press the "
same direction as the tape travel indicator. To stop fast-forwarding,
lightly press the opposite side of the "
B Rewind button
To rewind the tape, press the "
tion opposite to the tape travel indicator. To stop rewinding, lightly
press the opposite side of the "
B Eject button (
When the "
tape is ejected.
Before the ignition switch is turned to the "OFF" position, eject the
tape from the player. Always make certain that you remove the cas-
sette tape.
B Dolby BNR button (BNR)
Press "BNR" button
NR system*. The "BNR" indicator will light up and high-frequency
noise on the tape will be reduced for clearer sound reproduction.
* Noise reduction system manufactured under license from Dolby Laboratories
Licensing Corporation. "Dolby" and the double-D Symbol are trade marks of
Dolby Laboratories Licensing Corporation.
CD player operation (if optional CD player is connected)
An optional CD player can be connected to this audio unit. See your
SUBARU dealer for more information. For CD player operation proce-
dures, refer to "CD player 2" in this chapter.
)
7
" button is pressed, playback stops and the cassette
Q
when playing tapes recorded using the Dolby
" and "
" or " " button
" or " " button.
" or " " button
" or " " button.
– CONTINUED –
Audio
9
" , are
9
in the
9
in the direc-
5-49