Subaru 2002 Legacy Owner's Manual page 207

n When cassette tape is in the player
9
When the "TAPE" button is pressed, the display will show "PLAY"
and the player will start playback.
B Tape travel indicators
These indicate the direction the cassette tape is moving.
" : indicates that the top side of the cassette is being played back.
A : indicates that the bottom side of the cassette is being played
back.
B Program switching button (PROG)
I
When the program switching button "PROG" is pressed during
playback, the tape travel indicators will switch and the player will be-
gin playing back the opposite side of the tape. The same mechanism
is automatically activated when the end of the tape is reached. This
allows the opposite side of the tape to play, providing continuous
playback.
B Fast-forward button (FF)
T
To fast-forward the tape, press the "FF" button . The display will
9
show "FF". To stop fast-forwarding, press the "FF" or "TAPE" button.
B Rewind button (REW)
Y
To rewind the tape, press the "REW" button . The display will indi-
9
cate "REW". To stop rewinding, press the "REW" or "TAPE" button.
B Eject button (
)
W
When " " button is pressed, play back stops and the cassette
tape is ejected.
The ejection function also operates when the ignition switch is in the
"LOCK" position. Always make certain that you remove the cassette
tape.
B Tape program sensor button (TPS)
n Blank skip
E
When the "TPS" button is pressed, the "TPS" indicator will come on
and the player will automatically skip any blank portion of 15 second
or more and play the next program, even if it is on the other side. To
cancel blank skip mode, press the "TPS" button again.
5-26