Running Belt Tension And Tracking Adjustment; About; Videos; Tools - Precor Precision 400 Series Service Manual

Running Belt Tension and Tracking Adjustment

About

This procedure provides instructions to adjust the running belt tension and tracking align-
ment to manufacturer specification. The running belt tension and tracking should be adjus-
ted anytime the running belt is replaced, removed/installed, or when there are any
detectable belt or tracking issues.

Videos

RUNNING BELT ALIGNMENT PROCEDURE

Tools

QTY
1 1/4" Hex Key Socket and Ratchet
2 Belt Tension Gauge
(1) Proper tensioning of the belt requires the use of two tensioning gauges, Precor part
number PPP000000020007101or equivalent.

Specification

Running Belt
Forbo brand running belt tension
Notes:
1) Referenced to gauge reading 3.0 (0.0%)

Procedure

Running belt tension adjustment
CAUTION:
Review entire procedure before starting.
1. Clean the running belt and deck, see
on page 119.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
1
(PPP000000020007101 or equivalent)
(2)
1) ONLY use hand tools for belt tension adjustment.
2) Final belt tension adjustments should only be done in 1/4 turn incre-
ments.
Running Belt Tension and Tracking Adjustment
TOOL
Specification
3.55 (0.55%)
"Running Belt and Deck Cleaning Procedure"
5 Adjustment Procedures
(1)
Page 52