R20 Standard Service Menus - Precor Precision 400 Series Service Manual

INFORMATION DISPLAY
1
LPCA VersionSW
uPA BOOT SW
uPA current Version
2
CPA Boot Version
CPA Current Version
GUI Current Version
GUI Restore Version
My Settings Menu (5671)
menu: Settings > My Settings.
The My Settings menu is used to customize the equipment user interface localization and
Workouts default settings.
To learn about the R40 console My Settings service menu, see the TRM445 Owners
Manual:
Owners
l

R20 Standard Service Menus

R20 Standard Service Menus
The Standard Service Menus include the Hardware Validation, Information, and My Set-
tings service menus.
TIP: To learn additional information about the R20 console standard service menus,
refer to the TRM425 Owners Manual, see
1
Lower Printed Circuit Assembly board; also refered to as the Lower PCA or simply as the
lower board. On treadmills, it is the console to base function interface and the motor con-
troller unit (MCU). On self-powered units, it is the lower PCA console to base function inter-
face.
2
Touchscreen console Control Processing Assembly.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
The LPCA software version.
The console upper boot software version information.
The console upper current software version information.
The CPA boot up software version.
The CPA current operating software version.
The graphic userI interface software version.
The graphic userI interface restore software version.
Manual.
4 Standard Service Menus
Standard Service Menus
DESCRIPTION
.
Owners Manual
Page 42