Running Belt Tension and Tracking Adjustment
About
This procedure provides instructions to verify and make adjustments to the running belt ten-
sion and tracking alignment. The running belt tension and tracking should be verified anytime
the running belt is replaced or the belt tracking is not centered.
Tools
5/16" Hex Key
l
Note: Proper tensioning of the belt requires the use of two tensioning gauges, Pre-
cor part number PPP000000020007101.
Specification
System Component
Running belt tension (gauge/percent)
Notes: * Referenced to 3.0 (0.0%)
Procedure
CAUTION:
Running belt tension adjustment
Review entire procedure before starting.
Experience Series 700 Line Treadmills
Belt tension gauges (2 qty)
l
(Precor pn PPP000000020007101)
1) The tracking adjustments should only be done in 1/4 turn increments.
2) ONLY use the right side tension bolt to adjust tracking.
3) ONLY use hand tools to adjust tracking.
4 Adjustment Procedures
Running Belt Tension and Tracking Adjustment
Specification
3.55 (0.55%)*
40