Standard Service and Diagnostics Software
Service Access Codes
Service Menu
Hardware
Validation
Diagnostics
Information
Display
*
My Settings
***
Demo mode
Note: * R20 Console only
** R40 Console only.
How to Access the Service and Diagnostic Menus
R40 Console: How to access the service and diagnostic menus
1. Go to the console default Home page.
2. Select the Settings softkey.
3. Simultaneously touch/release the My Settings (top right) and Edit (bottom right) softkeys.
© 2014 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Description
Set of system diagnostic tests that verify proper
operation of console and base functionality. Useful
for troubleshooting and resolving problems.
Provides 1) Information page; provides product
software/hardware version and equipment usage
information and 2) Display Error Log; provides
history of event error codes and diagnostics used
for maintenance and troubleshooting.
Specify treadmill security, configuration, and
maximum machine parameter limits.
Demo mode program used to demonstrate the
machine features...
Note: Demo mode cycles through the Workout
screens, shows the media control icons, and
disables the softkey menus. To stop demo mode,
press and hold the bottom right softkey for 5-8
seconds to open the Demo Settings screen.
Select "Turn demo OFF" softkey and then select
Save to disable Demo mode.
Access
Code
51765761
(536**)
65
5671***
5555**
Page 11 of 56