Driving Position Memory System - Acura 2011 RL Owner's Manual

Driving Position Memory System

Your vehicle has a memory feature
for the steering wheel, driver's seat,
and outside mirror positions.
Two seat, steering wheel, and
outside mirror positions can be
stored in separate memories. You
select a memorized position by
pushing the appropriate button.
You can also select the memorized
positions by unlocking the doors
with the remote. Each remote has a
driver's ID (see page 174
driver's ID (Driver 1) corresponds to
the memorized positions stored with
the memory button (1). The driver's
ID (Driver 2) corresponds to the
memorized positions stored with the
memory button (2).
164
Storing a Driving Position in
Memory
Store a driving position only when
the vehicle is parked.
Turn the ignition switch to the ON
1.
(II) position. You cannot add a
new driving position to the
memory unless the ignition switch
is in the ON (II) position. You can
recall a memorized position with
the ignition switch in any position.
). The 2. Adjust the seat to a comfortable
position (see page
Adjust the steering wheel to a
comfortable position (see page
148 ).
Adjust the outside mirrors for best
visibility (see page
MEMORY
BUTTONS
3. Press the MEMO button on the
156 ). driver's door. You will hear a beep.
The indicator in the memory
buttons (1 and 2) will blink.
Immediately press one of the
memory buttons (1 or 2) until you
161 ). hear two beeps. The indicator in
the memory button will stay on.
The current positions of the
driver's seat, steering wheel, and
outside mirrors are now stored.
MEMO BUTTON