Acura 2011 RL Owner's Manual page 429

CMBS OFF Button
CMBS OFF BUTTON
To switch the CMBS off, press the
CMBS OFF button on the dashboard
for about 1 second. When you do this,
a beeper sounds, a CMBS indicator
on the instrument panel comes on,
and a CMBS OFF message appears
on the multi-information display. To
switch the system back on, press the
button again for about 1 second.
Collision Mitigation Braking System (CMBS )
When you turn the ignition switch to
the ON (II) position, the system will
be in the previously selected on or
off setting.
TM
Automatic Shut Off
Any of the conditions below can
cause the CMBS to shut off. When
the system shuts off, the CMBS
indicator in the instrument panel
comes on, and a CHECK CMBS
SYSTEM message appears on the
multi-information display for about 5
seconds.
An abnormal tire condition is
detected (wrong tire size, flat tire,
etc.).
Extended off-road or mountainous
driving.
Driving your vehicle with the
parking brake applied.
Driving your vehicle in bad
weather (rain, fog, snow, etc.).
A dirty radar sensor cover on the
front grille.
TM
CONTINUED
423