Table of Contents
Advertisement
Automatic Climate Control
The automatic climate control
system adjusts the fan speed and
airflow levels to maintain the interior
temperature you select.
In AUTO mode, the vehicle's interior
temperature is independently
regulated for the driver and
passenger. If the driver's side of the
vehicle is getting too much sun, the
system will adjust to a lower
temperature.
1.
Press the AUTO button.
2.
Set the desired temperature with
the temperature control bars.
You will see AUTO in the display
if the climate mode is selected.
The system automatically selects the
proper mix of conditioned and/or
heated air that will, as quickly as
possible, raise or lower the interior
temperature to your preference.
When you set the temperature to its
lower or its upper limit, the system
runs at full cooling or heating only. It
does not regulate the interior
temperature.
When you change the fan speed, the
fan is taken out of AUTO mode and
starts to run at the selected speed.
Semi-automatic Operation
You can manually select various
functions of the climate control
system when it is in fully automatic
mode. All other features remain
automatically controlled. Making any
manual selection causes the word
AUTO in the display to go out.
Climate Control System
Rear Ventilation
The airflow from the rear vents can
be adjusted when the fan mode is in
the
or
position.
You can adjust the direction of the
airflow by moving the tab on each
vent up-and-down and side-to-side.
You can also open or close the vents
with the dial between them.
To Turn Everything Off
Press the OFF button. However, a
lack of airflow can cause the
windows to fog up. You should keep
the fan on at all times so stale air and
moisture do not build up in the
interior and cause fogging.
211
Advertisement
Chapters
Table of Contents
