Acura 2011 RL Owner's Manual page 171

To cancel the storing procedure
after pressing the MEMO button, do
any of the following:
Fail to press a memory button
within 5 seconds.
Readjust the seat or steering
position.
Readjust the outside mirror
position.
Turn the ignition switch out from
the ON (II) position.
Each memory button stores only one
driving position. Storing a new
position erases the previous setting
stored in that button's memory.
All stored driving positions will be
lost if your vehicle's battery goes
dead or is disconnected.
Selecting a Memorized Position
MEMORY BUTTONS
To select a memorized position, do
this:
1. Make sure the shift lever is in
Park.
Press the desired memory button
2.
(1 or 2) until you hear a beep.
Driving Position Memory System
The system will move the seat,
steering wheel, and outside mirrors
to the memorized positions. The
indicator in the selected memory
button will flash during movement.
When the adjustments are complete,
you will hear two beeps, and the
indicator will remain on.
To change the ''MEMORY
POSITION LINK'' setting, see page
104 .
CONTINUED
165