Acura 2011 RL Owner's Manual page 69

Parking Brake and
U.S. Canada
Brake System
Indicator
This indicator has two functions:
1. It comes on when you turn the
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. Driving with
the parking brake not fully
released can damage the rear
brakes, axles, and tires.
If you drive without releasing the
parking brake, a beeper will sound,
and you will also see a ''RELEASE
PARKING BRAKE'' message on
the multi-information display (see
page 191 ).
2. If it stays on after you have fully
released the parking brake while
the engine is running, or if it
comes on while driving, it can
indicate a problem in the brake
system. You will also see a
''BRAKE FLUID LOW'' or
''CHECK BRAKE SYSTEM''
message on the multi-information
display. For more information, see
page 510 .
U.S. Canada
Side Airbag Off
Indicator
This indicator comes on briefly when
you turn the ignition switch to the
ON (II) position. If it comes on at
any other time, it indicates that the
passenger's side airbag has
automatically shut off. You will also
see a ''PASSENGER SIDE AIRBAG
OFF'' message on the multi-
information display. For more
information, see page 35 .
Instrument Panel Indicators
Supplemental Restraint
System Indicator
This indicator comes on briefly when
you turn the ignition switch to the
ON (II) position. If it comes on at
any other time, it indicates a
potential problem with your front
airbags. This indicator will also alert
you to a potential problem with your
airbag system components. You will
also see a ''CHECK AIRBAG
SYSTEM'' message on the multi-
information display. For more
information, see page 34 .
63