Acura 2011 RL Owner's Manual page 456

Maintenance Minder
Also, the percentage ''0'' keeps
blinking on the display.
This particular message is displayed
when the mileage after the engine oil
life became 0% reaches 10 miles (for
U.S. models)/10 km (for Canadian
models).
450
TM
NEGATIVE DISTANCE TRAVELED
U.S.
MAINTENANCE ITEM CODE(S)
Canada
If the indicated required service is
not done and the remaining engine
oil life becomes 0%, the multi-
information display will show a
''SERVICE PAST DUE'' message,
the total distance traveled after the
remaining oil life became 0%, and the
maintenance item code(s).
This message is displayed again
when you drive over 10 miles (for
U.S. models) or 10 km (for Canadian
models) after seeing the 0% message.
Immediately have the service
performed, and make sure to reset
the display as previously described.
These messages will come on every
time you turn the ignition switch to
the ON (II) position.
Pressing either INFO button ( / )
switches the display from the
message to another display. To see
the message again, press either
INFO button repeatedly.
▲ ▼