Acura 2011 RL Owner's Manual page 112

Multi-Information Display
Auto Tilt & Telescopic
When AUTO TILT & TELESCOPIC
is set to ON, the steering wheel
automatically moves fully in and up
when you turn the ignition switch to
the LOCK (0) position and release it,
or when you remove the built-in key
from the ignition switch.
106
While the multi-information display
is in the POSITION SETUP screen
of the CUSTOMIZE GROUP, press
the SEL/RESET button. The screen
changes to CUSTOMIZE MENU.
Press the INFO ( / ) button until
▲ ▼
you see the above display.
Press the SEL/RESET button. The
screen changes as shown above.
Select ON or OFF by pressing the
INFO ( / ) button, then press the
▲ ▼
SEL/RESET button to enter your
selection.