Acura 2011 RL Owner's Manual page 238

Audio System
− You can store up to 12
Preset
preset channels using the six preset
buttons. Each button stores one
channel from the XM1 band and one
channel from the XM2 band.
232
To store a channel:
Press the
1.
XM BAND
up by pushing the interface
selector up. Either XM1 or XM2
will be shown on the display.
2. Use the tune, skip (seek), or scan
function to tune to a desired
channel.
In category mode, only channels
within that category can be selected.
In channel mode, all channels can be
selected.
3. Pick the preset button you want
for that channel. Press and hold
the button until you hear a beep.
4. Repeat steps 2 and 3 to store the
first six channels.
5. Press the
up again. The other XM band will
be shown. Store the next six
channels using steps 2 and 3.
Once a channel is stored, press and
button or scroll release the proper preset button to
tune to it.
button or scroll