Acura 2011 RL Owner's Manual page 476

Lights
Replacing a Front Turn Signal
Light Bulb
Open the hood.
1.
2. Remove the left or right side
engine compartment cover from
the side you are working on by
carefully pulling the cover out (see
page 457 ).
If you are replacing the bulb on
the driver's side, remove the
battery cover (see page
470
492 ).
3. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
4. Push the bulb in slightly, and turn
it counterclockwise.
BULB SOCKET
Install the new bulb into the
5.
socket.
6. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
7. Turn on the lights to make sure
the new bulb is working.
8. Reinstall the engine compartment
side cover.
9. (Driver's side)
Reinstall the battery cover.