Acura 2011 RL Owner's Manual page 477

Replacing a Front Parking/Side
Marker Bulb
1. Open the hood.
2. Remove the left or right side
engine compartment cover (see
page 457 ).
If you are replacing the bulb on
the driver's side, remove the
battery cover (see page
3. (Passenger's side)
Use a flat-tip screwdriver to
remove the holding clip from the
windshield washer reservoir.
SOCKET
BULB
492 ).
4. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
5. Pull the bulb straight out of its
socket.
6. Install the new bulb into the
socket.
7. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
8. Turn on the lights to make sure
the new bulb is working.
9. (Passenger's side)
Reinstall the windshield washer
CLIP
reservoir.
Reinstall the engine compartment
side cover.
10. (Driver's side)
Reinstall the battery cover.
Lights
471