Acura 2011 RL Owner's Manual page 221

Hide thumbs Also See for 2011 RL:

Table of Contents

The ignition switch must be in the

ACCESSORY (I) or the ON (II)

position. Press the AUDIO button to

view the audio control display. Turn

the system on by pressing the

power/volume knob or the AM/FM

button (AM or FM button on

Hawaiian model). Adjust the volume

by turning the power/volume knob.

The band and frequency that the

radio was last tuned to are shown on

the display. To change bands, press

the AM/FM button (AM or FM

button Hawaiian models). You can

also change bands between FM1 and

FM2 by pushing the interface

selector up. Each time you push it up,

the band will change to FM1 or FM2.

On the FM bands, STEREO will be

shown on the navigation screen and

ST on the upper display, if the

station is broadcasting in stereo.

Stereo reproduction on AM is not

Audio System

To Select a Station

You can use any of five methods to

find radio stations on the selected

band: tune, skip (seek), scan, the

preset buttons, and auto select.

On the FM band, you can also use

the features provided by the radio

data system (RDS). For more

information on the RDS, see page

Chapters

Table of Contents