Table of Contents
Advertisement
Preset
Each preset button or
−
preset icon can store one frequency
on AM and two frequencies on FM.
To store a preset memory location:
1.
Select the desired band, AM or
FM. FM1 and FM2 let you store
two sets of FM frequencies with
the preset buttons (on-screen
icons).
2.
Use the tune, skip (seek), scan, or
RDS function to tune the radio to a
desired station.
3.
Press the preset button, and hold
it until you hear a beep. You can
also store frequencies with the
interface dial. Select the preset
icon you want to store the
frequency on, then press ENTER
on the interface selector, and hold
it for more than 2 seconds.
4.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
A.SEL ICON
AUTO SELECT
If you are
−
traveling and can no longer receive
your preset stations, you can use the
auto select feature to find stations in
the local area.
Audio System
U.S. models (except Hawaiian) and
Canadian models
Push the interface selector down to
scroll down the screen, highlight
A.SEL, then press ENTER on the
interface selector. You will see
A.SEL on the upper display and
A.SEL on the screen, and the system
goes into scan mode for several
seconds.
Hawaiian models
Press the A.SEL button. You will see
A.SEL on the upper display, A.SEL
on the screen, and the system goes
into scan mode for several seconds.
The system stores the frequencies of
six AM and twelve FM stations in
the preset buttons.
CONTINUED
217
Advertisement
Chapters
Table of Contents
