Changing A Flat Tire - Acura 2011 RL Owner's Manual

Hide thumbs Also See for 2011 RL:
Table of Contents

Advertisement

If you have a flat tire while driving,
pull over safely. Drive slowly along
the shoulder until you get to an area
far away from traffic lanes.
The vehicle can easily roll off
the jack, seriously injuring
anyone underneath.
Follow the directions for
changing a tire exactly, and
never get under the vehicle
when it is supported only by the
jack.
1.
Park the vehicle on firm, level, and
non-slippery ground. Put the
transmission in Park. Apply the
parking brake.
If you are towing a trailer, unhitch
it.
2.
Turn on the hazard warning lights,
and turn the ignition switch to the
LOCK (0) position. Have all
passengers get out of the vehicle
while you change the tire.

Changing a Flat Tire

TRUNK FLOOR
SPARE TIRE
TOOL CASE
3.
Open the trunk, and fold the trunk
floor forward.
Take the tool case out of the spare
4.
tire.
5.
Unscrew the wing bolt, and
remove the spacer cone. Then
take the spare tire out of its well.
JACK
CONTINUED
497

Advertisement

Table of Contents
loading

Table of Contents