Acura 2011 RL Owner's Manual page 478

Hide thumbs Also See for 2011 RL:
Table of Contents

Advertisement

Lights
Replacing a Fog Light Bulb
Your vehicle uses halogen light
bulbs. When replacing a bulb, handle
it by its plastic case, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
Halogen bulbs get very hot when lit. Oil,
perspiration, or a scratch on the glass
can cause the bulb to overheat and
shatter.
The fog lights were properly aimed
when your vehicle was new. If you
regularly carry heavy items in the
trunk or pull a trailer, readjustment
may be required. Adjustment should
be done by your dealer or another
qualified technician.
472
BOLTS
1.
Use a Phillips-head screwdriver to
remove the two undercover bolts,
and remove the holding clip with a
flat-tip screwdriver.
2.
Carefully push up the side under
cover into the bumper.
CLIP
CONNECTOR
3.
Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
4.
Remove the bulb by turning it one-
quarter turn counterclockwise.
BULB

Advertisement

Table of Contents
loading

Table of Contents