Table of Contents
Advertisement
Collision Mitigation Braking System (CMBS )
Do not allow anything to impact the
radar sensor or the radar sensor
cover. If either of these parts
receives a strong impact, switch the
system off by pressing the CMBS
OFF button, and have your vehicle
checked by a dealer. If the front
grille ever needs to be repaired,
consult a dealer first.
If the radar sensor cover or the radar
sensor ever needs to be removed,
take your vehicle to a dealer.
420
TM
TM
When the CMBS is on, the radar sensor
constantly scans f or vehicles directly
ahead of you. This means that driving
on a road with a f ew or no vehicles
could cause a CHECK CMBS RADAR
SENSOR message to appear on the
multi-inf ormation display. This is
normal and not a cause f or concern.
Certain conditions may cause the
radar aim to be temporarily out of
proper range, such as the following
two examples:
Your vehicle is tilted because of a
heavy load in the rear or from
modifications to the suspension.
Do not overload your vehicle (see
Carrying Cargo on page
do not make any modifications to
the suspension (see Accessories
and Modifications on page
The tires are not correctly
maintained. Always make sure the
tire pressures are correct (see
page
482
), and that the tires are
the correct size and in good
condition (see Tires on page
394
), and
392
).
481
).
Advertisement
Chapters
Table of Contents
