Acura 2011 RL Owner's Manual page 54

Installing a Child Seat
RIGID TYPE
4. Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker's instructions.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
48
FLEXIBLE TYPE
Other LATCH-compatible seats
have a flexible-type connector as
shown above.
5. Whatever type you have, follow
the child seat maker's instructions
for adjusting or tightening the fit.
6. Open the anchor cover.
TETHER STRAP HOOK
7. Route the tether strap over the
head restraint, then attach the
tether strap hook to the anchor,
making sure the strap is not
twisted.
8. Tighten the strap according to the
seat maker's instructions.
9. Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
COVER
ANCHOR