Change System Password; Save Router Configuration Settings - D-Link DSL-G604T User Manual

DSL-G604T Wireless A DSL Router User's Guide

Change System Password

To change the password used to access the Router web manager, click the Admin button in the Tools directory
to display the Administrator Settings menu. Under the Administrator heading, type the New Password and
Confirm Password to be certain you have typed it correctly. Click the Apply button to activate the new
password. The System User Name remains "admin", this cannot be changed using the web manager interface.
Be sure to save the new setting (see below).
Figure 4- 13. Administrator Settings change password menu

Save Router Configuration Settings

When you have completed configuration of the Router, make sure you save the current configuration settings to
flash memory or risk losing the settings. To save the current configuration settings, click the Admin button in
the Tools directory to display the Administrator Settings menu.
Figure 4- 14. Save and Reboot menu
Under Save and Reboot, click the Reboot button to Force the DSL-G604T to system restart. The current
settings will be saved to NV-RAM and the system will restart. Do not turn off the Router during this process. It
should take about two minutes to complete. After restarting, it is a good idea to backup the Router configuration
file to your computer in the same Administrator Settings menu.
Restart Access Point
To reboot the wireless access point, click the Reboot button that will Force the DSL-G604T Wireless LAN to
restart.
52