Crestron Isys TPS-4L Operations & Installation Manual page 26

3.6-Inch Wall Mount Touchpanel
22 • 3.6-inch Wall Mount Touchpanel: Isys
"Address Book" Window – Serial Setup
3. After setting the correct parameters, click OK to return to the Crestron
Toolbox main window.
4. Click Tools | Network Device Tree, or click the network device tree icon
to display the "Network Device Tree" window. Use the Address Book
icon or the drop-down list at the lower left of the window to select the
appropriate address for the devices in the system. Communications are
confirmed when the network devices are displayed.
Network Device Tree
To view a specific device, expand the network device tree by clicking +. Expand the
network device tree until the device to be managed is selected. Right-click the
desired Net ID to open the sub-menu. This menu provides a wide range of functions,
including; change the Net ID, open text console, upload project, update firmware,
etc. Refer to the following figure.
®
TPS-4L
Crestron Isys
Operations & Installation Guide - DOC. 6449
®
TPS-4L