Crestron Isys TPS-4L Operations & Installation Manual page 8

3.6-Inch Wall Mount Touchpanel
4 • 3.6-inch Wall Mount Touchpanel: Isys
TPS-4L Physical Dimensions
Controls and Ports
Buttons
The TPS-4L touchpanel has 10 hard buttons; five on each side of the display.
The buttons are backlit with white LEDs; brightness is program adjustable. The
buttons can be programmed to automate frequently used functions.
NET
This 4-pin terminal block connector provides communication with and power
from a Cresnet control network. For more information, refer to "Network
Wiring" on page 6.
Pins 24 and G provide 24 VDC and ground; pins Y and Z provide
communications (data). Note that the connector pin identification is printed on
the unit label above it.
Reset
A hardware reset button is located behind the bezel as shown in the following
graphic. This button is used as a last resort to reboot the touchpanel (similar to
cycling power) in the unlikely event that the touchpanel hangs up.
®
TPS-4L
Crestron Isys
Operations & Installation Guide - DOC. 6449
®
TPS-4L