Crestron Isys TPS-4L Operations & Installation Manual page 22

3.6-Inch Wall Mount Touchpanel
System View of PRO2
18 • 3.6-inch Wall Mount Touchpanel: Isys
PRO2 from the Control Systems folder of the Device Library and drop it in the upper
pane of the System Views. The PRO2 with its associated communication ports is
displayed in the System Views upper pane.
NOTE: The information in this section assumes that the reader has knowledge of
SIMPL Windows. If not, refer to the extensive help information provided with the
software.
In Configuration Manager, drag the PRO2 from the Control Systems folder of the
Device Library to System Views.
The System Views lower pane displays the PRO2 system tree. This tree can be
expanded to display and configure the communications ports.
Expanded PRO2 System Tree
C2Net-Device Slot in Configuration Manager
To incorporate a TPS-4L into the system, drag the TPS-4L (Cresnet) from the
Touchpanels | Touchpanels (Cresnet) folder of the Device Library and drop it in
System Views. The PRO2 system tree displays the TPS-4L in Slot 9, with a default
Net ID of 03, as shown in the following illustration.
C2Net Device, Slot 9
®
TPS-4L
Crestron Isys
Operations & Installation Guide - DOC. 6449
®
TPS-4L