Hardware Hookup - Crestron TPMC-8X Operation Manual

Crestron TPMC-8X
Ventilation
Connect the Device
Operations Guide – DOC. 6539C

Hardware Hookup

The TPMC-8X should be used in a well-ventilated area.
To prevent overheating, do not operate this product in an area that exceeds the
environmental temperature range listed in the table of specifications.
When making connections to the TPMC-8X, consider the following:
•
Use the included Crestron power supply for these devices.
The power supply cable cannot be extended.
Hardware Connections for the TPMC-8X
Left Side View
USB: FROM
KEYBOARD OR
OTHER WIRED
DEVICE
Bottom View
* These connectors are optional for powering the device.
CAUTION: Do not apply excessive pressure to the touchscreen display during
handling. Doing so can crack the screen and damage the touchpanel.
NOTE: When inserting a Compact Flash card, orient the card so that the small lip at
the top of the card is facing away from the touchpanel.
®
Isys i/O 8.4" WiFi Touchpanel
COMPACT FLASH
CARD SLOT
HEADPHONES
12V 3.5A:
AC POWER PACK*
DOCKING STATION
CONNECTOR*
®
8.4" WiFi Touchpanel: TPMC-8X • 47
Isys i/O
Right Side View