Fitting Trigger Electronics - Bosch CRI 848H Original Instructions Manual

en 70 | CRI/CRIN 848H | Initial startup
4.5

Fitting trigger electronics

1. Slacken off the hexagon bolts (Fig. 31, item 1).
2. Slide the mounting bracket (Fig. 31, item 2) to the
rear.
Fig. 32: Frame with mounting bracket
3. Slacken off the hexagon bolts (Fig. 33, item 3).
4. Place the trigger electronics (Fig. 33, item 4) on the
two hexagon bolts.
5. Tighten the hexagon bolts (Fig. 33, item 3).
3
Fig. 33: Fitting trigger electronics
|
1 689 989 087 2018-07-24
6. Slide the mounting bracket (Fig. 34, item 2) for-
wards.
7. Tighten the hexagon bolts (Fig. 34, item 1).
1
2
Fig. 34:
4
Setting mounting bracket
1
2
Robert Bosch GmbH