View System Event Log - Lenovo HR650X V2 User Manual

Table 48. BMC network configuration details (continued)
Configuration Address Source
VLAN_ID
Current Configuration Address
Source
Station IP Address
Subnet Mask
Station MAC Address
Router IP Address
Router MAC Address
Configure IPV6 Support
Lan Channel 8 (Share NIC)
IPV6 Support
IPV6 Support Is Disabled
Lan Channel 1 (Dedicated NIC)
IPV6 Support
Configuration Address Source
Current Configuration Address
Source
Station IPV6 Address
Prefix Length
IPV6 Address Atatus
IPV6 DHCP Algorithm
Configuration Router Lan2
Address Source
Current Router Configuration
Address Source
DynamicAddressBmcDhcp
IPV6 Router IP Address
IPV6 Router Prefix Length
IPV6 Router Prefix Value

View system event log

See the table below for the descriptions of options in View System Event Log screen:
Don't change/Static/ Select to configure LAN channel parameters statically or
DynamicBmcDhcp dynamically (by BIOS or BMC). Unspecified option will
not modify any BMC network parameters during BIOS
phase.
-
N/A
-
N/A
-
N/A
-
N/A
-
N/A
-
N/A
-
N/A
-
N/A
-
N/A
Disabled/Enabled Enable or disable LAN1 IPV6 support.
-
N/A
-
N/A
Disabled/Enabled Enable or disable LAN2 IPV6 support.
Don't change/Static/ Select to configure LAN channel parameters statically or
DynamicBmcDhcp dynamically (by BIOS or BMC). Unspecified option will
not modify any BMC network parameters during BIOS
phase.
-
N/A
-
N/A
-
N/A
-
N/A
-
N/A
-
Don't change/Static/
DynamicBmcDhcp
-
N/A
-
N/A
-
N/A
-
N/A
. 135
Chapter 5 BIOS setup