Install The Raid Super Capacitor Module - Lenovo HR650X V2 User Manual

Attention:
• Read "Installation Guidelines" on page 25 to ensure that you work safely.
• Power off the server and disconnect all power cords for this task.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Procedure
Step 1. Remove the top cover. See "Remove the top cover" on page 30.
Step 2. Disconnect the cable of the RAID super capacitor module.
Step 3. Remove the RAID super capacitor module on the air baffle.
Figure 12. Super capacitor module removal
a. Open the retention clip on the holder of the RAID super capacitor module.
b. Take the RAID super capacitor module out of the holder.
After you finish
If you are instructed to return the old RAID super capacitor module, follow all packaging instructions and use
any packaging materials that are provided.

Install the RAID super capacitor module

Use this information to install the RAID super capacitor module on the air baffle.
About this task
Attention:
• Read "Installation Guidelines" on page 25 to ensure that you work safely.
• Power off the server and disconnect all power cords for this task.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
.
Chapter 4 Hardware replacement procedures
35