Lenovo HR650X V2 User Manual page 94

– Never hold two or more memory modules together so that they touch. Do not stack memory modules
directly on top of each other during storage.
– Never touch the gold memory module connector contacts or allow these contacts to touch the outside
of the memory module connector housing.
– Handle memory modules with care: never bend, twist, or drop a memory module.
– Do not use any metal tools (such as jigs or clamps) to handle the memory modules, because the rigid
metals may damage the memory modules.
– Do not insert memory modules while holding packages or passive components, which can cause
package cracks or detachment of passive components by the high insertion force.
Procedure
Step 1. Remove the top cover. See "Remove the top cover" on page 30.
Step 2. If your server comes with an air baffle, remove it. See "Remove the air baffle" on page 41.
Step 3. Remove the memory module from the slot.
mm
Figure 59. Memory module removal
a. Open the retaining clip on each end of the memory module slot.
Attention: To avoid breaking the retaining clips or damaging the memory module slots, handle
the clips gently.
b. Grasp the memory module at both ends and carefully lift it out of the slot.
After you finish
1. Install a memory module filler or a new memory module to cover the slot. See "Install a memory module"
on page 93.
2. If you are instructed to return the old memory module, follow all packaging instructions and use any
packaging materials that are provided.
86
HR650X V2 User Guide