Navigation - Lenovo HR650X V2 User Manual

2. On the logon page of the Remote Management Module, enter the user name and password.
For example:
• Username= admin
• Password= admin
3. Click OK to view the home page of the Remote Management Module.
After a successful initial logon, the system administrator can create new users and has full permission of
Remote Management Module.
You can modify username and password by using web browser or IPMI command directly. Ensure that you
follow the change rules.
Enter the name of the new user:
• Name must be string of 1 to 16 alpha-numeric characters.
• It must start with an alphabetical character.
• It is case-sensitive.
• Special character '-' (hyphen), '_' (underscore), '@' (at sign) are allowed.
Enter a strong password consisting of at least one upper case letter, alpha-numeric characters, and special
characters.
Note: Password field is mandatory and should have a minimum of 8 characters when SNMP status is
enabled.

Navigation

When the Remote Management Module is successfully logged on, the Remote Management Module home
page is displayed.
There are several tabs on the vertical toolbar which is on the left pane of the Remote Management Module
home page. By clicking these tabs, you can get the specific system information and take the relevant tasks
listed in the following table:
. 147
Chapter 6 BMC Setup