Raid Super Capacitor Module Replacement; Remove The Raid Super Capacitor Module - Lenovo HR650X V2 User Manual

Step 2. Install the top cover to your server.
Attention: Handle the top cover carefully. Dropping the top cover with the cover latch open might
damage the cover latch.
Figure 11. Top cover installation
a. Ensure that the cover latch is in the open position. Lower the top cover onto the chassis until
both sides of the top cover engage the guides on both sides of the chassis. Then, slide the top
cover to the front of the chassis.
Note: Before you slide the top cover forward, ensure that all the tabs on the top cover engage
the chassis correctly.
b. Press down the cover latch and ensure that the cover latch is completely closed.
c. Use a screwdriver to turn the cover lock to the locked position.
After you finish
After installing the top cover, complete the parts replacement. See "Complete the parts replacement" on
page 113.

RAID super capacitor module replacement

The RAID super capacitor module protects the cache memory on the installed RAID adapter. You can
purchase a RAID super capacitor module from Lenovo. Use this information to remove and install a RAID
super capacitor module.

Remove the RAID super capacitor module

Use this information to remove the RAID super capacitor module on the air baffle.
About this task
34
HR650X V2 User Guide