Trusted Computing - Lenovo HR650X V2 User Manual

Table 22. Lenovo advanced details (continued)
PCI/PCIE OCP Port n PXE
Settings
USB Settings USB Devices: n Drive, n
Keyboards, n Mouse, n Hubs
USB Pre-Connector Disable
Front USB2.0 Port n
Front USB3.0 Port n
Network PXE Retry Count
Settings
PXE Ports Retry Count
Boot Retry Count
Boot Fail Policy
-
Driver Health
-
Fan Profile
-
Power
Technology

Trusted computing

See the table below for the descriptions of options in Trusted Computing screen:
118
HR650X V2 User Guide
Disabled/Enabled
N/A
Disabled/Enabled
Disabled/Enabled
Disabled/Enabled
N/A
N/A
N/A
Halt/Reboot
N/A
Performance/Automatic/
Acoustic
Disable/Energy
Efficient/Custom/Max
Performance/Nominal
Frequency
Enable/Disable the PXE function of the
OCP card.
Display the quantity of different USB
devices, such as keyboards, mouses,
and so on.
Selectively enable/disable each of the
USB physical connectors (physical
ports). Once a connector is disabled,
any USB device plugged into the
connectors will not be detected by BIOS
or OS.
Enable/Disable this USB physical
connector (physical port). Once
disabled, any USB device plugged into
the connectors will not be detected by
BIOS or OS.
Enable/Disable this USB physical
connector (physical port). Once
disabled, any USB device plugged into
the connectors will not be detected by
BIOS or OS.
PXE retry count can be set from 0 to 50,
and 50 means the server will always
retry.
PXE ports retry count can be set
between 0 to 3.
PXE retry count can be set from 0 to 50,
and 50 means the server will always
retry.
If all bootable devices are retried and
related controls are also applied but the
boot still fails, halt or reboot the system.
Provide health status for drivers/
controllers.
-
Enable the power management features.
[Nominal Frequency]
Set CPU working in nominal frequency
when system is idle.