Adjust The Retainer On The M.2 Adapter; Install The M.2 Adapter And M.2 Drive - Lenovo HR650X V2 User Manual

If you are instructed to return the defective component, follow all packaging instructions and use any
packaging materials that are provided.

Adjust the retainer on the M.2 adapter

Use this information to adjust the retainer on the M.2 adapter.
About this task
Sometimes you need to adjust the M.2 drive retainer to a correct keyhole that can accommodate the
particular size of the M.2 drive you wish to install.
Attention:
• Read "Installation Guidelines" on page 25 to ensure that you work safely.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Procedure
Figure 16. M.2 retainer adjustment
Step 1. Press both sides of the retainer.
Step 2. Move the retainer forward until it is in the large opening of the keyhole.
Step 3. Take the retainer out of the keyhole.
Step 4. Insert the retainer into the correct keyhole.
Step 5. Press both sides of the retainer.
Step 6. Slide the retainer backwards (toward the small opening of the keyhole) until it is seated in place.

Install the M.2 adapter and M.2 drive

Use this information to install the M.2 adapter and M.2 drive.
Attention:
• Read "Installation Guidelines" on page 25 to ensure that you work safely.
• Power off the server and disconnect all power cords for this task.
38
HR650X V2 User Guide