Remove A Riser Card - Lenovo HR650X V2 User Manual

There are different types of riser assembly configurations. The removal or installation procedure of the riser
card is similar for all types of riser assembly. The following takes the LP-FH riser assembly as an example.

Remove a riser card

Use this information to remove a riser card.
About this task
The riser assembly you want to remove might be different from the following illustrations, but the removal
method is the same.
Attention:
• Read "Installation Guidelines" on page 25 to ensure that you work safely.
• Power off the server and disconnect all power cords for this task.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Procedure
Step 1. Remove the top cover. See "Remove the top cover" on page 30.
Step 2. If there is any PCIe adapter installed on the riser card, record the cable connections first. Then,
disconnect all cables from the PCIe adapter.
Step 3. Grasp the riser assembly by its edges and carefully lift it out of the chassis.
Figure 55. Riser assembly removal
82
HR650X V2 User Guide