Uncore Configuration; Memory Configuration - Lenovo HR650X V2 User Manual

Table 39. Common RefCode configuration details
Item
Numa
Common RefCode
Dfx Configuration

Uncore configuration

See the table below for the descriptions of options in Uncore Configuration screen:
Table 40. Uncore configuration details
Item
Uncore General Configuration
Uncore Per Socket Configuration
Uncore Dfx Configuration
Uncore Dfx Per Socket
Configuration

Memory configuration

See the table below for the descriptions of options in Memory Configuration screen:
Table 41. Memory configuration details
Item
Integrated Memory
Controller (iMC)
STEP DRAM Test
Operation Mode
SmartTest
Enforce POR
Enforce Population POR
128
HR650X V2 User Guide
Option
Disable/Enable
N/A
Option
N/A
N/A
N/A
N/A
Option
N/A
Disable/Enable
Test Only/Test and Repair
Disable/Enable
POR/Disable
Disable Enforcement/Enforce
Supported Populations/Enforce
Validated Populations
Description
Enable or disable Non Uniform Memory Access (NUMA).
Display and provide options to change the common RefCode Dfx
settings.
Description
Display and provide options to change the Uncore
settings.
Set the Uncore per socket configuration.
Display and provide options to change the Uncore Dfx
settings.
Set Uncore Dfx per socket configuration.
Description
-
Enable or disable STEP (Samsung TestBIOS
& Enhanced PPR) function
Set operation mode.
Enable or disable SmartTest function. Default
is enable. Enabling means run Smart-Test
during the cold boot.
Enable: enforce Plan Of Record restrictions
for DDR4 frequency and voltage
programming.
Disable: disable this feature and user is able
to run at higher frequencies, specified in the
DDR Frequency Limit field (limited by
processor support).
Auto: set it to the MRC default setting (current
default is Enable).
Enable Memory Population POR
Enforcement. Selecting Enforce Validated
Populations will only allow populations that
have been validated.