Lenovo HR650X V2 User Manual page 92

Procedure
Step 1. Touch the static-protective package that contains the riser card to any unpainted surface on the
outside of the server. Then, take the riser card out of the package and place it on a static-protective
surface.
Step 2. Install the riser card and secure it to the bracket.
Figure 57. Riser card installation
1. Align the screw holes in the riser card with the corresponding ones in the bracket.
2. Install the two screws to secure the riser card to the bracket
Step 3. If necessary, reinstall the PCIe adapters on the riser card. See "Install a PCIe adapter" on page 80.
Then, refer to your note to reconnect any cables of the PCIe adapters on the riser card.
84
HR650X V2 User Guide