Swinging Arm - BMW HP4 RACE Rider's Manual

5
70
Fit bolts 2, do not tighten.
z
Fit and tighten bolts 1.
Tail section with tank
cover on rear frame
Thread-locking compound:
Loctite 243, Medium-firm
6 lb/ft (8 Nm)
Tail section on rear
frame
Thread-locking compound:
Loctite 243, Medium-firm
6 lb/ft (8 Nm)
Tighten screws 2.
Tail section with tank
cover on rear frame
Thread-locking compound:
Loctite 243, Medium-firm
6 lb/ft (8 Nm)
Tail section on rear
frame
Thread-locking compound:
Loctite 243, Medium-firm
6 lb/ft (8 Nm)

Swinging arm

Setting
The HP4 Race concept provides
the option to adjust the swinging
arm pivot point to various posi-
tions. Additional tools such as
the engine jack or footrest stands
are required for this; how to han-
dle these tools is not addressed
further here. If you are not sure
whether this work is within your