Swinging Arm - BMW S 1000 RR 2021 Rider's Manual

CAUTION
Hot exhaust system
Risk of burn injury
Do not touch a hot exhaust
system.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Adjust rebound-stage
damping using the adjusting
screw 1.
To increase damping: Use the
tool from the on-board toolkit
to turn adjusting screw 1 in
direction A.
To reduce damping: Use the
tool from the on-board toolkit
to turn adjusting screw 1 in
direction B.
Rebound stage, basic
setting, rear
Turn adjuster knob to the
limit position in direction A,
then turn it 5 clicks in direc-
tion B. (Road use with rider
85 kg)

SWINGING ARM

Adjusting swinging arm
The swinging arm pivot point
can be adjusted to three levels.
Additional tools such as an en-
gine lifter or footrest stand are
required, however, they will not
be dealt with in detail here. If
you are not sure whether this
work is within your capabil-
ity, contact a specialist work-
shop, preferably an authorised
BMW Motorrad retailer.
Adjusting swinging arm pivot
point
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
115