Gearshift-Pattern; Reverser; Gearshift-Pattern Reverser - BMW HP4 RACE Rider's Manual

Adapt EBR
7
Requirement
Multifunction display must show
94
the rider view
z
Press MODE 1 to select
EBR 2.
Briefly press TC/EB+ 3 (+) to
increase the value 5.
Briefly press TC/EB-4 (-) to
reduce the value 5.
The set value 5 is shown in the
multifunction display and lies
between ­7 and +7:
+1 ... +7: increase the drag
torque at the rear wheel by a
maximum of seven stages. The
value +7 corresponds to the
highest braking effect through
the engine drag torque.
­1 ... ­7: reduction of the drag
torque at the rear wheel by a
maximum of seven stages. The
value ­7 corresponds to the
lowest braking effect through
the engine drag torque.

Gearshift-pattern

reverser

Gearshift-pattern reverser

The motorcycle is equipped by
default with a shift pattern that
offers the best and quickest way
to shift gears for the racing track.
If desired, the shift pattern can
be inverted by modifying the
gearshift rod. As for driving on
public roads, first gear can then
be engaged by pushing down-
ward and all other gears by push-
ing upward.