Rider's Seat - BMW HP4 RACE Rider's Manual

4
38
Press MODE 1 twice in quick
succession.
Riding mode is changed.
z
The following riding modes can
be selected:
WET: When riding on wet roads
with rain tires.
INT: When riding on slightly
wet or drying roads.
DRY1: When riding on dry
roads with softer response
characteristics.
DRY2: When riding on dry
roads with full power.
Repeat process repeatedly un-
til the desired riding mode is
displayed in the multifunction
display.

Rider's seat

Remove rider's seat
Remove bolts 1 and remove

rider's seat.

Lay the rider's seat on a clean
surface with the upholstered
side down.
Installing rider's seat
Attach rider's seat and fit
bolts 1.
NOTICE
Observe torque, otherwise there
is a danger of damage to the car-
bon part.
Rider's seat on tail sec-
tion
Joint compound: Lubricate
bolt, Optimoly TA
2 lb/ft (3 Nm)